What do you think of 300-115 dumps exam cram? The pass4itsure 300-115 dumps pdf practice test prepares candidates for the Cisco exam 300-115 dumps: Implementing Cisco IP Switched Networks exam. But every individual who possesses the basic knowledge in planning, configuring, and verifying the implementation of complex enterprise switching solutions that use the Cisco Enterprise Campus Architecture. This course enables you to master switching solutions that use the Cisco Enterprise Campus Architecture and prepares you to pass the Implementing Cisco IP Switched Networks (SWITCH 300-115) qualifying exam. Pass4itsure can also voluntarily apply for authorizing their CCNP Routing and Switching,CCDP certification credentials. The pass4itsure 300-115 dumps SWITCH exam certifies the Cisco knowledge and skills of successful candidates. We have a highly skilled team of the best professionals in the industry.
Pass4itsure 300-115 Dumps Related Exams
- 642-871 Designing Cisco network Service Architectures (ARCH)
- 642-873 Designing Cisco network Service Architectures (ARCH)
- 642-874 Designing Cisco Network Service Architectures
- 300-101 Implementing Cisco IP Routing
- 300-115 Implementing Cisco IP Switched Networks
- 300-320 Designing Cisco Network Service Architectures
Related Pass4itsure 300-115 Dumps Certifications
- Wireless LAN
- Wireless BYOD Specialist
- VPN and Security
- Unified Communications
- Substation Automation
- TelePresence Video
- Storage Networking
- Instant Download After Purchase
- 100% Money Back Guarantee
- 365 Days Free Update
- 7000+ Satisfied Customer
300-115: Implementing Cisco IP Switched Networks dumps consists all the necessary tools and information to help you pass 300-115 dumps CCNP Routing and Switching,CCDP certification exam. This exam tests a candidate’s knowledge in planning, configuring, and verifying the implementation of complex enterprise switching solutions that use the Cisco Enterprise Campus Architecture. In it, we’ll cover the fundamentals of switch configuration, plan and design, IP configuration, routing, Spanning Tree Protocol (STP) and Real-Time Transport Protocol (RTP). A candidate is tested on knowledge of Implementing Cisco IP Switched Networks course maintenance. We’ll also help you understand different protocols such as Hot Standby Router Protocol (HSRP), Virtual Router Redundancy Protocol (VRRP), and Gateway Load Balancing Protocol (GLBP).
Welcome to Pass4itsure Blog: Free Cisco 300-115 Dumps PDF(14-21)
Refer to the exhibit.
Switch A, B, and C are trunked together and have been properly configured for VTP. Switch C receives VLAN information from the VTP server Switch A, but Switch B does not receive any VLAN information. What is the most probable cause of this behavior?
A. Switch B is configured in transparent mode.
B. Switch B is configured with an access port to Switch A, while Switch C is configured with a trunk port to Switch B.
C. The VTP revision number of the Switch B is higher than that of Switch A.
D. The trunk between Switch A and Switch B is misconfigured.
300-115 exam Correct Answer: A
VTP transparent switches do not participate in VTP. A VTP transparent switch does not advertise its VLAN configuration and does not synchronize its VLAN configuration based on received advertisements, but transparent switches do forward VTP advertisements that they receive out their trunk ports in VTP Version 2.
Refer to the exhibit.
Switch A, B, and C are trunked together and have been properly configured for VTP. Switch B has all VLANs, but Switch C is not receiving traffic from certain VLANs. What would cause this issue?
A. A VTP authentication mismatch occurred between Switch A and Switch B.
B. The VTP revision number of Switch B is higher than that of Switch A.
C. VTP pruning is configured globally on all switches and it removed VLANs from the trunk interface that is connected to Switch C.
D. The trunk between Switch A and Switch B is misconfigured.
Correct Answer: C
VTP pruning increases network available bandwidth by restricting flooded traffic to those trunk links that the traffic must use to reach the destination devices. Without VTP pruning, a switch floods broadcast, multicast, and unknown unicast traffic across all trunk links within a VTP domain even though receiving switches might discard them. VTP pruning is disabled by default. VTP pruning blocks unneeded flooded traffic to VLANs on trunk ports that are included in the pruning eligible list. The best explanation for why switch C is not seeing traffic from only some of the VLANs, is that VTP pruning has been configured.
After the recent upgrade of the switching infrastructure, the network engineer notices that the port roles that were once “blocking” are now defined as “alternate” and “backup.” What is the reason for this change?
A. The new switches are using RSTP instead of legacy IEEE 802.1D STP.
B. IEEE 802.1D STP and PortFast have been configured by default on all newly implemented Cisco Catalyst switches.
C. The administrator has defined the switch as the root in the STP domain.
D. The port roles have been adjusted based on the interface bandwidth and timers of the new Cisco Catalyst switches.
300-115 dumps Correct Answer: A
RSTP works by adding an alternative port and a backup port compared to STP. These ports are allowed to immediately enter the forwarding state rather than passively wait for the network to converge.
RSTP bridge port roles:
* Root port A forwarding port that is the closest to the root bridge in terms of path cost
* Designated port A forwarding port for every LAN segment
* Alternate port A best alternate path to the root bridge. This path is different than using the root port. The alternative port moves to the forwarding state if there is
a failure on the designated port for the segment.
* Backup port A backup/redundant path to a segment where another bridge port already connects. The backup port applies only when a single switch has two
links to the same segment (collision domain). To have two links to the same collision domain, the switch must be attached to a hub.
* Disabled port Not strictly part of STP, a network administrator can manually disable a port Reference:
An administrator recently configured all ports for rapid transition using PortFast. After testing, it has been determined that several ports are not transitioning as they should. What is the reason for this?
A. RSTP has been enabled per interface and not globally.
B. The STP root bridge selection is forcing key ports to remain in non-rapid transitioning mode.
C. STP is unable to achieve rapid transition for trunk links.
D. The switch does not have the processing power to ensure rapid transition for all ports.
300-115 pdf Correct Answer: C
RSTP can only achieve rapid transition to the forwarding state on edge ports and on point-to- point links, not on trunk links. The link type is automatically derived from the duplex mode of a port. A port that operates in full-duplex is assumed to be point-to-point, while a half-duplex port is considered as a shared port by default. This automatic link type setting can be overridden by explicit configuration. In switched networks today, most links operate in full-duplex mode and are
treated as point-to-point links by RSTP. This makes them candidates for rapid transition to the forwarding state.
Which technique automatically limits VLAN traffic to only the switches that require it?
A. access lists
B. DTP in nonegotiate
C. VTP pruning
Correct Answer: C
VTP pruning enhances network bandwidth use by reducing unnecessary flooded traffic, such as broadcast, multicast, unknown, and flooded unicast packets to only the switches that require it. VTP pruning increases available bandwidth by restricting flooded traffic to those trunk links that the traffic must use to access the appropriate network devices. By default, VTP pruning is disabled.
What effect does the mac address-table aging-time 180 command have on the MAC address- table?
A. This is how long a dynamic MAC address will remain in the CAM table.
B. The MAC address-table will be flushed every 3 minutes.
C. The default timeout period will be 360 seconds.
D. ARP requests will be processed less frequently by the switch.
E. The MAC address-table will hold addresses 180 seconds longer than the default of 10 minutes.
300-115 vce Correct Answer: A
You can configure the amount of time that an entry (the packet source MAC address and port that packet ingresses) remain in the MAC table. To configure the aging time for all MAC addresses, perform this task: Command Purpose Step 1 switch# configure Enters configuration mode. terminal
Step 2 switch(config)# mac- Specifies the time before an entry ages out address-table aging- and is discarded from the MAC address table. time seconds [vlan The range is from 0 to 1000000; the default is vlan_id] 300 seconds. Entering the value 0 disables the MAC aging. If a VLAN is not specified, the aging specification applies to all VLANs. This example shows how to set the aging time for entries in the MAC address table to 600 seconds (10 minutes): switch# configure terminal switch(config)# mac-address-table aging-time 600
While working in the core network building, a technician accidently bumps the fiber connection between two core switches and damages one of the pairs of fiber. As designed, the link was placed into a non-forwarding state due to a fault with UDLD. After the damaged cable was replaced, the link did not recover. What solution allows the network switch to automatically recover from such an issue?
B. errdisable autorecovery
C. IP Event Dampening
D. command aliases
E. Bidirectional Forwarding Detection
300-115 exam Correct Answer: B
There are a number of events which can disable a link on a Catalyst switch, such as the detection of a loopback, UDLD failure, or a broadcast storm. By default, manual intervention by an administrator is necessary to restore the interface to working order; this can be done by issuing shutdown followed by no shutdown on the interface. The idea behind requiring administrative action is so that a human engineer can intercede, assess, and (ideally) correct the issue. However, some
configurations may be prone to accidental violations, and a steady recurrence of these can amount to a huge time sink for the administrative staff. This is where errdisable autorecovery can be of great assistance. We can configure the switch to automatically re-enable any error-disabled interfaces after a specified timeout period. This gives the offending issue a chance to be cleared by the user (for example, by removing an unapproved device) without the need for administrative intervention.
A network engineer deployed a switch that operates the LAN base feature set and decides to use the SDM VLAN template. The SDM template is causing the CPU of the switch to spike during peak working hours. What is the root cause of this issue?
A. The VLAN receives additional frames from neighboring switches.
B. The SDM VLAN template causes the MAC address-table to overflow.
C. The VLAN template disables routing in hardware.
D. The switch needs to be rebooted before the SDM template takes effect.
300-115 dumps Correct Answer: C
SDM Template Notes:
All templates are predefined. There is no way to edit template category individual values.
The switch reload is required to use a new SDM template.
The ACL merge algorithm, as opposed to the original access control entries (ACEs) configured by the user, generate the number of TCAM entries listed for security and QoS ACEs. The first eight lines (up to Security ACEs) represent approximate hardware boundaries set when a template is used. If the boundary is exceeded, all processing overflow is sent to the CPU which can have a major impact on the performance of the switch. Choosing the VLAN template will actually disable routing (number of entry for unicast or multicast route is zero) in hardware.
What if I don’t pass the exam? How do I claim Refund?
Any Pass4itsure.com user who fails the corresponding exam has 30 days from the date of purchase of Exam on Pass4itsure.com for a full refund. The pass4itsure prepares IT professionals for Implementing Cisco IP Switched Networks (SWITCH 300-115 dumps), a qualifying exam for the Cisco CCNP Routing and Switching and CCDP certifications. These people carry a life long experience. We can accept and arrange a full refund requests only if your score report or any relevant filed be confirmed. Using different products to prepare for one single exam can be costly for you as well as it will waste your precious time. You need only one reliable source who can give you everything under the same shelter.
[New Pass4itsure Cisco 300-115 PDF Dumps Questions From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWLW41Sk5QSDdPTFU
[New Pass4itsure Cisco 210-260 PDF Dumps Questions From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWU0xad3NvRWR4Qzg
Passing the exam needs rich knowledge and experience. The SWITCH 300-115 exam certifies the switching knowledge and skills of successful candidates. While accumulating these abundant knowledge and experience needs a lot of time. You can choose pass4itsure 300-115 dumps training courses or training tool and spending a certain amount of money to select a high quality training institution’s training program is worthful. The team works day and night to do research and devise the best dumps possible in the industry today.
Exam Code: 300-115
Exam Name: Implementing Cisco IP Switched Networks
Although you are busy working and you have not time to prepare for the exam, you want to get Cisco 300-115 dumps free certificate. They are certified in planning, configuring, and verifying the implementation of complex enterprise switching solutions that use the Cisco Enterprise Campus Architecture. At the moment, you must not miss Pass4itsure 300-115 dumps free certification training materials which are your unique choice. The dumps are efficient and contain the brief questions so that you do not have to go through various other text materials as well as study guides while preparing for the exam. Pass4itsure’s the right place for you.
Sale Best Pass4itsure Cisco 300-101 Dumps Preparation Materials, Real Cisco 300-101 Dumps Exam Sample Will Be More Popular, We Help You Pass Implementing Cisco IP Routing. Pass4itsure 300-115 Dumps Exam Youtube Free Online Test Here:
Pass4itsure Promo Code 15% Off