2017 Valid and Updated Microsoft 70-417 Exam Implementing and Administering a Microsoft Windows 2000 Network Infrastructure

We at Lead4pass are slowly rolling out virtual labs, which provide you access to a safe, sandbox environment with which you can gain 70-417 exam practical experience with the technology.

Vendor: Microsoft
Certifications: MCSA
Exam Name: Upgrading Your Skills to MCSA Windows Server 2012
Exam Code: 70-417
Total Questions: 427 Q&As

70-417 Exam Content Focus Areas

I’ll make this section of the blog post short and sweet. If you don’t study heavily to master the content from the following exam domains, you will fail the 417 exam:

  • Remote management (especially as it relates to managing Windows Server 2008 from Windows Server 2012)
  • IPAM (keep an eye on R2 enhancements)
  • AD FS (Microsoft really, really wants you to understand this technology deeply for some reason)
  • Hyper-V (again, keep an eye on R2 new features)
  • Failover Clustering (especially as it relates to VMs)

The 410, 411, and 70-417 exam deal with implementation rather than design. Therefore, you need to have hands-on experience with the technologies before you sit for the exam of you’ll find yourself potentially hopelessly lost.

70-411 exam

Lead4pass Latest and Most Accurate Microsoft 70-417 Exam Q&As  

QUESTION 117
Your network contains an Active Directory domain named contoso.com. The domain contains a server
named Server 1. Server1 runs Windows Server 2012 R2.
You need to create a 3-TB virtual hard disk (VHD) on Server1.
Which tool should you use?
A. New-StoragePool
B. Diskpart
C. File Server Resource Manager (FSRM)
D. New-StorageSubsytemVirtualDisk
Correct Answer: B
Explanation
Explanation/Reference:
You can create a VHD from either the Disk Management snap-in or the command line (diskpart). From the
DiskPart command-line tool at an elevated command prompt, run the create vdisk command and specify
the file (to name the file) and maximum (to set the maximum size in megabytes) parameters. The following
code demonstrates how to create a VHD file at
C:\vdisks\disk1.vdh with a maximum file size of 16 GB (or 16,000 MB).
DiskPart
Microsoft DiskPart version 6.1.7100
Copyright (C) 1999-2008 Microsoft Corporation.
On computer: WIN7
DISKPART> create vdisk file=”C:\vdisks\disk1.vhd” maximum=16000

QUESTION 118
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server
role installed.
The disks on Server1 are configured as shown in the exhibit. (Click the Exhibit button.)

70-417 exam

You create a virtual machine on Server1.
You need to ensure that you can configure a pass-through disk for the virtual machine.
What should you do?
A. Convert Disk 1 to a GPT disk.
B. Convert Disk 1 to a dynamic disk.
C. Delete partition E.
D. Take Disk 1 offline.
Correct Answer: D
Explanation
Explanation/Reference:
Explanation:
NB: added the missing exhibit
http://blogs.technet.com/b/askcore/archive/2008/10/24/configuring-pass-through-disks-inhyper- v.aspx
Passthrough Disk Configuration Hyper-V allows virtual machines to access storage mapped directly to the

Hyper-V server without requiring the volume be configured. The storage can either be a physical disk
internal to the Hyper-V server or it can be a Storage Area Network (SAN) Logical Unit (LUN) mapped to
the Hyper-V server. To ensure the Guest has exclusive access to the storage, it must be placed in an
Offline state from the Hyper-V server perspective. Additionally, this raw piece of storage is not limited in
size so, hypothetically, it can be a multi terabyte LUN.
After storage is mapped to the Hyper-V server, it will appear as a raw volume and will be in an Offline state
(depending on the SAN Policy (Figure 1-1)) as seen in Figure 1.

70-417 exam

70-417 exam

We stated earlier that a disk must be Offline from the Hyper-V servers’ perspective in order for the Guest to
have exclusive access. However, a raw volume must first be initialized before it can be used. To
accomplish this in the Disk Management interface, the disk must first be brought Online. Once Online, the
disk will show as being Not Initialized (Figure 2).

70-417 exam

Right-click on the disk and select Initialize Disk (Figure 3)

70-417 exam

Select either an MBR or GPT partition type (Figure 4).

70-417 exam

Once a disk is initialized, it can once again be placed in an Offline state. If the disk is not in an Offline state,
it will not be available for selection when configuring the Guest’s storage. In order to configure a Pass
through disk in a Guest, you must select Attach a virtual disk later in the New Virtual Machine Wizard
(Figure 5).

70-417 exam

If the Pass-through disk will be used to boot the operating system, it must be attached to an IDE Controller.
Data disks can take advantage of SCSI controllers. In Figure 6, a Passthrough disk is attached to IDE
Controller 0.

70-417 exam

Note: If the disk does not appear in the drop down list, ensure the disk is Offline in the Disk Management
interface (In Server CORE, use the diskpart.exe CLI). Once the Pass-through disk is configured, the Guest
can be started and data can placed on the drive. If an operating system will be installed, the installation
process will properly prepare the disk. If the disk will be used for data storage, it must be prepared in the
Guest operating system before data can be placed on it. If a Pass- through disk, being used to support an
operating system installation, is brought Online before the Guest is started, the Guest will fail to start.
When using Pass-through disks to support an operating system installation, provisions must be made for
storing the Guest configuration file in an alternate location. This is because the entire Pass-through disk is
consumed by the operating system installation. An example would be to locate the configuration file on
another internal drive in the Hyper-V server itself. Or, if it is a cluster, the configuration file can be hosted
on a separate cluster providing highly available file services. Be aware that Pass-through disks cannot be
dynamically expanded. Additionally, when using Pass-through disks, you lose the capability to take
snapshots, and finally, you cannot use differencing disks with Pass-through disks.

QUESTION 119
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server
role installed. On Server1, you create a virtual machine named VM1.
VM1 has a legacy network adapter.
You need to assign a specific amount of available network bandwidth to VM1.
What should you do first?
A. Add a second legacy network adapter, and then run the Set-VMNetworkAdaptercmdlet.
B. Add a second legacy network adapter, and then configure network adapter teaming.
C. Remove the legacy network adapter, and then run the Set-VMNetworkAdaptercmdlet.
D. Remove the legacy network adapter, and then add a network adapter.
Correct Answer: D
Explanation
Explanation/Reference:
Explanation:
Add a New network adapter because the legacy network adapter doesn’t support bandwidth management.
References:
Exam Ref 70-410: Installing and
Configuring Windows Server 2012 R2: Objective 3.3: Create and Configure virtual networks, Chapter 3: p.
177, 181


QUESTION 120
Your network contains an Active Directory domain named adatum.com. The domain contains a member
server named Host1. Host1 runs Windows Server 2012 R2 and has the Hyper-V server role installed.
Host1 hosts two virtual machines named VM5 and VM6. Both virtual machines connect to a virtual switch
named Virtual1.
On VM5, you install a network monitoring application named Monitor1. You need to capture all of the
inbound and outbound traffic to VM6 by using Monitor1.
Which two commands should you run from Windows PowerShell? (Each correct answer presents part of
the solution. Choose two.)
A. Get-VM “VM6” | Set-VMNetworkAdapter-IovWeight 1
B. Get-VM “VM5” | Set-VMNetworkAdapter -IovWeight 0
C. Get-VM “VM6” | Set-VMNetworkAdapter -PortMirroring Source
D. Get-VM “VM6” | Set-VMNetworkAdapter -AllowTeaming On
E. Get-VM “VM5” | Set-VMNetworkAdapter -PortMirroring Destination
F. Get-VM “VM5” | Set-VMNetworkAdapter -AllowTeaming On
Correct Answer: CE
Explanation
Explanation/Reference:
-PortMirroring specifies the port mirroring mode for the network adapter. This can be set to None, Source,
and Destination.
1. If set to Source, a copy of every network packet it sends or receives is forwarded to a virtual network
adapter configured to receive the packets.
2. If set to Destination, it receives copied packets from the source virtual network adapter.
In this scenario, VM5 is the destination which must receive a copy of the network packets from VM6, which
s the source.
Reference:


QUESTION 121
Your network contains a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts
a virtual machine named VM1 that runs Windows Server 2012 R2.
You create a checkpoint of VM1, and then you install an application on VM1. You verify that the application
runs properly.
You need to ensure that the current state of VM1 is contained in a single virtual hard disk file.
The solution must minimize the amount of downtime on VM1.
What should you do?
A. From a command prompt run dism.exe and specify the /commit-image parameter.
B. From a command prompt, run dism.exe and specify the /delete-image parameter.

C. From Hyper-V Manager, delete the checkpoint.
D. From Hyper-V Manager, inspect the virtual hard disk.
Correct Answer: C
Explanation
Explanation/Reference:


QUESTION 122
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.
Server1 hosts a virtual machine named VM1 that runs Windows Server 2012 R2.
VM1 has several snapshots.
You need to modify the snapshot file location of VM1.
What should you do?
A. Right-click VM1, and then click Export…
B. Shut down VM1, and then modify the settings of VM1.
C. Delete the existing snapshots, and then modify the settings of VM1.
D. Pause VM1, and then modify the settings of VM1.
Correct Answer: C
Explanation
Explanation/Reference:
Explanation: you will need to navigate to the Hyper-V Management snap-in
(C:\ProgramData\Microsoft\Windows\Hyper-V) and from there access the Snapshot file Location tab where
you can change the settings for the VM1 snapshot file location. However, since there are already several
snapshots in existence, you will need to delete them first because you will not be able to change the
location of the snapshot file while there is an existing snapshot and you need to modify the snapshot file
location of VM1.


QUESTION 123
You have a server named Server1 that runs Windows Server 2012 R2. You add a 4-TB disk named Disk 5
to Server1.
You need to ensure that you can create a 3-TB volume on Disk 5.
What should you do?
A. Create a storage pool.
B. Convert the disk to a GPT disk.
C. Convert the disk to a dynamic disk.
D. Create a VHD, and then attach the VHD.
Correct Answer: B
Explanation
Explanation/Reference:
The exhibit shows Disk1 to be a basic disk. The disk must be GPT since GPT disks allows for partitioning.
References:
Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 8: File Services and Storage,
Lesson 2: Provisioning and managing shared storage, p. 379-384 


QUESTION 124

You have a server named Corel that has a Server Core Installation of Windows Server 2012 R2. Corel has
the Hyper-V server role installed. Corel has two network adapters from different third-party hardware
vendors.
You need to configure network traffic failover to prevent connectivity loss if a network adapter fails.
What should you use?
A. New-NetSwitchTeam
B. Install-Feature
C. Add-NetSwitchTeamMember
D. Netsh.exe
Correct Answer: A
Explanation
Explanation/Reference:
Explanation:
Detailed Description
The New-NetSwitchTeam cmdlet creates a new switch team. A switch team must have a name for the
team and must be created with one or more members, or network adapters. The network switch team is a
the team that is controlled by a Hyper-V extensible switch forwarding extension. No other cmdlets can be used
to manage a switch team and the NetSwitchTeam cmdlets must not be used to manage standard, or non
switch, network adapter teams.


QUESTION 125
You have a server named Server1 that runs a Server Core installation of Windows Server 2012 R2
Standard. You establish a Remote Desktop session to Server1.
You need to identify which task can be performed on Server1 from within the Remote Desktop session.
What should you identify?
A. Install a feature by using the Server Manager.
B. Modify the network settings by using Config.
C. Disable services by using Msconfig.
D. Join a domain by using the System Properties.
Correct Answer: B
Explanation
Explanation/Reference:
In Windows Server 2012 R2, you can use the Server Configuration tool (Sconfig.cmd) to configure and
manage several common aspects of Server Core installations. You must be a member of the
Administrators group to use the tool. Sconfig.cmd is available in the Minimal Server Interface and in Server
with a GUI mode.
Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 2: Deploying servers, p. 80

Take the news that Apple’s dominance in profits by selling the smartphone environment. Taking over one hundred percent (with global losses counted in stocks), IOS has an advantage in Google. However, Google should not be too worried about this news. The the70-410 exam focuses on sales on the computer, while the current value of each Google device is to put another person in the Google service (or presence of your consolidation life of an existing user). These users are monetized by https://www.lead4pass.com/70-417.html from the list price or the benefit obtained in the matter.

Click the Link Below and Buy Full Actual Product:http://www.langall.com/up-to-date-microsoft-70-417-exam/

Article Link: https://www.pass4sureshop.com/popular-cisco-400-101-vce.html